Corrosion Protection
Industrial coatings for steel and concrete protect factories, warehouses, refineries and infrastructure from corrosion, chemical a…
Niraj and Patel Associate | Corrosion Preventive Contractors
Industrial Painting and Corrosion Protection Contractors in Gujarat
Niraj and Patel Associate is a professional corrosion preventive contractor in Ankleshwar, Gujarat. We provide abrasive blasting, anti-corrosive industrial coatings and painting for steel and concrete in chemical, fertilizer and pharmaceutical plants.
Our services
Protecting process plants across Gujarat and all over India
Authorised applicator for Berger Paints and Asian Paints
NACE Level 2 certified inspector
Own crews. We never subcontract
Blasting, coating and scaffolding from one team
25+
Happy Customers
39+
Projects
16
Trained Staffs
Curious About Our Coatings? Start the Conversation.
Start here
What does your surface need?
Pick the problem you are facing and we will point you to the right industrial painting or coating service.
Rust, scale or old paint on steel? Remove it and prepare the surface. Sandblasting and abrasive blasting
Steel or concrete exposed to chemicals? Protect it with coating systems. Corrosion protection coatings
Worn or chemical-hit factory floor? Get a joint-free resin floor. Epoxy and PU flooring
Not sure how bad the corrosion is? Inspect before you spend. Corrosion audit
Leaking roof, terrace or surface? Seal it with a membrane. Waterproofing services
Painting a home or building? Get a clean, durable finish. Decorative painting
Need safe access at height? Erect scaffolding for the job. MS scaffolding erection
Road or factory markings? Durable, reflective lines. Thermoplastic or cold curing road marking
Our industrial painting services
We protect steel and concrete with Industrial painting for demanding industrial sites
Industrial painting, sandblasting, anti-corrosive coatings, epoxy and PU flooring, waterproofing and corrosion audits from Niraj and Patel Associate, Ankleshwar.
Abrasive blasting
Abrasive blasting (sandblasting) removes rust, scale and old paint and gives steel the surface profile a coating needs to bond.
Epoxy & PU flooring
Epoxy and PU (polyurethane) flooring gives concrete a hard-wearing, easy-to-clean surface that resists wear, spills and chemicals…
Decorative coatings for homes/buildings
Decorative painting for homes and buildings using water-based acrylic emulsion, latex and vinyl acrylic paints, applied by airless…
Waterproofing Services
Liquid-applied waterproofing forms a flexible membrane that cures in place and keeps water out.
Corrosion Audit
A corrosion audit is a systematic inspection and evaluation of corrosion on your assets and the condition of their coatings, so re…
MS scaffolding erection
MS (mild steel) scaffolding erection gives crews safe access to work at height.
Thermoplastic road marking
Thermoplastic road marking is a durable, highly reflective marking made from thermoplastic resin and pigments, applied hot to the…
Cold curing road marking
Cold curing road marking uses cold-applied, two-component materials that harden without heat, for durable road and factory-floor m…
Why choose us
Why industries choose our corrosion protection coatings
Process plants expose steel and concrete to chemical attack, moisture and wear. A coating only protects as well as the surface under it, so our corrosion protection starts with abrasive blasting and ends with a multi-coat anti-corrosive system applied by our own crews.
Surface preparation first Sandblasting removes rust, scale and old paint so coatings bond.
Systems matched to the site Epoxy, polyurethane and other coatings chosen for the environment.
Checked after application Finished coatings are tested against the required specification.
Supervised crews Foremen and skilled painters work to our quality procedures.
Modern equipment High-pressure blasting units and spray machines for even coverage.
One team, start to finish Audit, blasting, coating and scaffolding handled together.
About us
Industrial painting and abrasive blasting contractors with 10 years of experience
We started in 2014, led by people who already had 40 years of experience in blasting and painting. Since then our crews have worked on steel and concrete in plants across Gujarat. The routine has not changed: prepare the surface, apply the coating system, then check the finished work.
- Accurate Testing Processes
- 100% Satisfaction Guarantee
- 39+ Successful Projects done
- Professional Engineers Provide Quality Services
Quality Services95%
Since 2014 40 years of experience in abrasive blasting and painting
How we work
A standard three-step work process
1
Consultation and assessment
Every project begins with an assessment of your assets and their environment.
2
Customised coating solution
A protective coating solution matched to the asset and its environment.
3
Application and quality assurance
Application under quality-control procedures, checked against the specification.
FAQ
Industrial painting services: your questions answered
Straight answers on industrial painting, sandblasting and protective coatings. Need something specific? Ask us.
What industrial painting services do you offer?
We provide industrial painting and anti-corrosive protective coatings for steel and concrete, abrasive blasting (sandblasting) for surface preparation, epoxy and PU flooring, waterproofing, decorative painting for homes and buildings, and MS scaffolding erection for safe access at height.
Why is sandblasting needed before painting steel?
A coating can only hold as well as the surface under it. Abrasive blasting removes rust, scale and old paint, and gives steel a rough profile that helps the paint grip. Most coating failures trace back to poor surface preparation.
What is airless spray painting?
Airless spray painting pumps paint at high pressure through a small nozzle so it atomises without compressed air. It gives fast, even coverage on large steel and concrete surfaces. We use airless spray machines, both pneumatic and electric.
Which paint brands do you work with?
We apply coatings from leading brands and are authorised applicators for Berger Paints and Asian Paints. We help match the product to the surface and the conditions it will face.
Can you paint concrete as well as steel?
Yes. We apply protective coatings on both steel and concrete, from anti-corrosive systems on steel structures and tanks to epoxy and PU coatings on concrete floors.
What is the difference between epoxy and polyurethane (PU) coatings?
Epoxy is a two-part resin coating with strong adhesion and chemical resistance, often used as a primer or mid coat. Polyurethane has high UV stability and abrasion resistance, so it is often used as a topcoat over epoxy.
Where do you carry out painting and coating work?
We are based in Ankleshwar and take on industrial painting and coating projects across Gujarat and all over India.
How do I get a quote for an industrial painting job?
Use the contact page or call +91 84600 37118 with the type of structure, its location and the condition of the surface. A site inspection is often needed before a firm quotation.